 |
Law-ref.org | REACH - Registration, Evaluation and Authorisation of Chemicals |
Site search
Sister sites
import [Global Index]
... 16. This Regulation lays down specific duties and obligations on manufacturers, importers and downstream users of substances on their own, in preparations and in articles. This Regulation is based on the principle that industry should manufacture, import or use substances or place them on the market with such responsibility and care as may be required to ensure that, under reasonably foreseeable conditions, human health and the environment are not adversely affected. ...
... 18. Responsibility for the management of the risks of substances should lie with the natural or legal persons that manufacture, import, place on the market or use these substances. Information on the implementation of this Regulation should be easily accessible, in particular for SMEs. ...
... 19. Therefore, the registration provisions should require manufacturers and importers to generate data on the substances they manufacture or import, to use these data to assess the risks related to these substances and to develop and recommend appropriate risk management measures. To ensure that they actually meet these obligations, as well as for transparency reasons, registration should require them to submit a dossier containing all this information to the Agency. Registered substances should be allowed to circulate on the internal market. ...
... 25. The responsibility to assess the risks and hazards of substances should be given, in the first place, to the natural or legal persons that manufacture or import substances, but only when they do so in quantities exceeding a certain volume, to enable them to carry the associated burden. Natural or legal persons handling chemicals should take the necessary risk management measures in accordance with the assessment of the risks of substances and pass on relevant recommendations along the supply chain. This should include describing, documenting and notifying in an appropriate and transparent fashion the risks stemming from the production, use and disposal of each substance. ...
... 29. Since producers and importers of articles should be responsible for their articles, it is appropriate to impose a registration requirement on substances which are intended to be released from articles and have not been registered for that use. In the case of substances of very high concern which are present in articles above tonnage and concentration thresholds, where exposure to the substance cannot be excluded and where the substance has not been registered by any person for this use, the Agency should be notified. The Agency should also be empowered to request that a registration be submitted if it has grounds for suspecting that the release of a substance from the article may present a risk to human health or the environment and the substance is present in those articles in quantities totalling over 1 tonne per producer or importer per year. The Agency should consider the need for a proposal for a restriction where it considers that the use of such substances in articles poses a risk to human health or the environment that is not adequately controlled. ...
... 55. Manufacturers and importers of a substance on its own or in a preparation should be encouraged to communicate with the downstream users of the substance with regard to whether they intend to register the substance. Such information should be provided to a downstream user sufficiently in advance of the relevant registration deadline if the manufacturer or importer does not intend to register the substance, in order to enable the downstream user to look for alternative sources of supply. ...
... 58. In order to have a chain of responsibilities, downstream users should be responsible for assessing the risks arising from their uses of substances if those uses are not covered by a safety data sheet received from their suppliers, unless the downstream user concerned takes more protective measures than those recommended by his supplier or unless his supplier was not required to assess those risks or provide him with information on those risks. For the same reason, downstream users should manage the risks arising from their uses of substances. In addition, it is appropriate that any producer or importer of an article containing a substance of very high concern should provide sufficient information to allow safe use of such an article. ...
... 60. For enforcement and evaluation purposes, downstream users of substances should be required to report to the Agency certain basic information if their use is outside the conditions of the exposure scenario detailed in the safety data sheet communicated by their original manufacturer or importer and to keep such reported information up-to-date. ...
... 86. It should be the responsibility of the manufacturer, importer and downstream user to identify the appropriate risk management measures needed to ensure a high level of protection for human health and the environment from the manufacturing, placing on the market or use of a substance on its own, in a preparation or in an article. However, where this is considered to be insufficient and where Community legislation is justified, appropriate restrictions should be laid down. ...
ARTICLE-3: Definitions [go to this ARTICLE]
... 7) Registrant: means the manufacturer or the importer of a substance or the producer or importer of an article submitting a registration for a substance; ...
... 7) Registrant: means the manufacturer or the importer of a substance or the producer or importer of an article submitting a registration for a substance; ...
... 11) Importer: means any natural or legal person established within the Community who is responsible for import; ...
... 11) Importer: means any natural or legal person established within the Community who is responsible for import; ...
... 12) Placing on the market: means supplying or making available, whether in return for payment or free of charge, to a third party. Import shall be deemed to be placing on the market; ...
... 13) Downstream user: means any natural or legal person established within the Community, other than the manufacturer or the importer, who uses a substance, either on its own or in a preparation, in the course of his industrial or professional activities. A distributor or a consumer is not a downstream user. A re-importer exempted pursuant to Article 2(7)(c) shall be regarded as a downstream user; ...
... 13) Downstream user: means any natural or legal person established within the Community, other than the manufacturer or the importer, who uses a substance, either on its own or in a preparation, in the course of his industrial or professional activities. A distributor or a consumer is not a downstream user. A re-importer exempted pursuant to Article 2(7)(c) shall be regarded as a downstream user; ...
... (b) it was manufactured in the Community, or in the countries acceding to the European Union on 1 January 1995 or on 1 May 2004, but not placed on the market by the manufacturer or importer, at least once in the 15 years before the entry into force of this Regulation, provided the manufacturer or importer has documentary evidence of this; ...
... (b) it was manufactured in the Community, or in the countries acceding to the European Union on 1 January 1995 or on 1 May 2004, but not placed on the market by the manufacturer or importer, at least once in the 15 years before the entry into force of this Regulation, provided the manufacturer or importer has documentary evidence of this; ...
... (c) it was placed on the market in the Community, or in the countries acceding to the European Union on 1 January 1995 or on 1 May 2004, before entry into force of this Regulation by the manufacturer or importer and was considered as having been notified in accordance with the first indent of Article 8(1) of Directive 67/548/EEC but does not meet the definition of a polymer as set out in this Regulation, provided the manufacturer or importer has documentary evidence of this; ...
... (c) it was placed on the market in the Community, or in the countries acceding to the European Union on 1 January 1995 or on 1 May 2004, before entry into force of this Regulation by the manufacturer or importer and was considered as having been notified in accordance with the first indent of Article 8(1) of Directive 67/548/EEC but does not meet the definition of a polymer as set out in this Regulation, provided the manufacturer or importer has documentary evidence of this; ...
... 30) Per year: means per calendar year, unless stated otherwise, for phase-in substances that have been imported or manufactured for at least three consecutive years, quantities per year shall be calculated on the basis of the average production or import volumes for the three preceding calendar years; ...
... 32) Supplier of a substance or a preparation: means any manufacturer, importer, downstream user or distributor placing on the market a substance, on its own or in a preparation, or a preparation; ...
... 33) Supplier of an article: means any producer or importer of an article, distributor or other actor in the supply chain placing an article on the market; ...
... 37) Exposure scenario: means the set of conditions, including operational conditions and risk management measures, that describe how the substance is manufactured or used during its life-cycle and how the manufacturer or importer controls, or recommends downstream users to control, exposures of humans and the environment. These exposure scenarios may cover one specific process or use or several processes or uses as appropriate; ...
ARTICLE-4: General provision [go to this ARTICLE]
... Any manufacturer, importer, or where relevant downstream user, may, whilst retaining full responsibility for complying with his obligations under this Regulation, appoint a third party representative for all proceedings under Article 11, Article 19, Title III and Article 53 involving discussions with other manufacturers, importers, or where relevant downstream users. In these cases, the identity of a manufacturer or importer or downstream user who has appointed a representative shall not normally be disclosed by the Agency to other manufacturers, importers, or, where relevant, downstream users. ...
... Any manufacturer, importer, or where relevant downstream user, may, whilst retaining full responsibility for complying with his obligations under this Regulation, appoint a third party representative for all proceedings under Article 11, Article 19, Title III and Article 53 involving discussions with other manufacturers, importers, or where relevant downstream users. In these cases, the identity of a manufacturer or importer or downstream user who has appointed a representative shall not normally be disclosed by the Agency to other manufacturers, importers, or, where relevant, downstream users. ...
ARTICLE-6: General obligation to register substances on their own or in preparations [go to this ARTICLE]
... 1. Save where this Regulation provides otherwise, any manufacturer or importer of a substance, either on its own or in one or more preparation(s), in quantities of 1 tonne or more per year shall submit a registration to the Agency. ...
... 3. Any manufacturer or importer of a polymer shall submit a registration to the Agency for the monomer substance(s) or any other substance(s), that have not already been registered by an actor up the supply chain, if both the following conditions are met: ...
ARTICLE-7: Registration and notification of substances in articles [go to this ARTICLE]
... 1. Any producer or importer of articles shall submit a registration to the Agency for any substance contained in those articles, if both the following conditions are met: ...
... (a) the substance is present in those articles in quantities totalling over 1 tonne per producer or importer per year; ...
... 2. Any producer or importer of articles shall notify the Agency, in accordance with paragraph 4 of this Article, if a substance meets the criteria in Article 57 and is identified in accordance with Article 59(1), if both the following conditions are met: ...
... (a) the substance is present in those articles in quantities totalling over 1 tonne per producer or importer per year; ...
... 3. Paragraph 2 shall not apply where the producer or importer can exclude exposure to humans or the environment during normal or reasonably foreseeable conditions of use including disposal. In such cases, the producer or importer shall supply appropriate instructions to the recipient of the article. ...
... 3. Paragraph 2 shall not apply where the producer or importer can exclude exposure to humans or the environment during normal or reasonably foreseeable conditions of use including disposal. In such cases, the producer or importer shall supply appropriate instructions to the recipient of the article. ...
... (a) the identity and contact details of the producer or importer as specified in section 1 of Annex VI, with the exception of their own use sites; ...
... (a) the substance is present in those articles in quantities totalling over 1 tonne per producer or importer per year; ...
ARTICLE-8: Only representative of a non-Community manufacturer [go to this ARTICLE]
... 3. If a representative is appointed in accordance with paragraphs 1 and 2, the non-Community manufacturer shall inform the importer(s) within the same supply chain of the appointment. These importers shall be regarded as downstream users for the purposes of this Regulation. ...
ARTICLE-9: Exemption from the general obligation to register for product and process orientated research and development (PPORD) [go to this ARTICLE]
... 1. Articles 5, 6, 7, 17, 18 and 21 shall not apply for a period of five years to a substance manufactured in the Community or imported for the purposes of product and process orientated research and development by a manufacturer or importer or producer of articles, by himself or in cooperation with listed customers and in a quantity which is limited to the purpose of product and process orientated research and development. ...
... 2. For the purpose of paragraph 1, the manufacturer or importer or producer of articles shall notify the Agency of the following information: ...
... (a) the identity of the manufacturer or importer or producer of articles as specified in section 1 of Annex VI; ...
... 3. The Agency shall check the completeness of the information supplied by the notifier and Article 20(2) shall apply adapted as necessary. The Agency shall assign a number to the notification and a notification date, which shall be the date of receipt of the notification at the Agency, and shall forthwith communicate that number and date to the manufacturer, or importer, or producer of articles concerned. The Agency shall also communicate this information to the competent authority of the Member State(s) concerned. ...
... 5. In the absence of any indication to the contrary, the manufacturer or importer of the substance or the producer or importer of articles may manufacture or import the substance or produce or import the articles not earlier than two weeks after the notification. ...
... 5. In the absence of any indication to the contrary, the manufacturer or importer of the substance or the producer or importer of articles may manufacture or import the substance or produce or import the articles not earlier than two weeks after the notification. ...
... 5. In the absence of any indication to the contrary, the manufacturer or importer of the substance or the producer or importer of articles may manufacture or import the substance or produce or import the articles not earlier than two weeks after the notification. ...
... 5. In the absence of any indication to the contrary, the manufacturer or importer of the substance or the producer or importer of articles may manufacture or import the substance or produce or import the articles not earlier than two weeks after the notification. ...
... 6. The manufacturer or importer or producer of articles shall comply with any conditions imposed by the Agency in accordance with paragraph 4. ...
... 7. The Agency may decide to extend the five-year exemption period by a further maximum of five years or, in the case of substances to be used exclusively in the development of medicinal products for human or veterinary use, or for substances that are not placed on the market, for a further maximum of ten years, upon request if the manufacturer or importer or producer of articles can demonstrate that such an extension is justified by the research and development programme. ...
... 8. The Agency shall forthwith communicate any draft decisions to the competent authorities of each Member State in which the manufacture, import, production or product and process orientated research takes place. When taking decisions as provided for in paragraphs 4 and 7, the Agency shall take into account any comments made by such competent authorities. ...
ARTICLE-10: Information to be submitted for general registration purposes [go to this ARTICLE]
... (i) the identity of the manufacturer(s) or importer(s) as specified in section 1 of Annex VI; ...
... (viii) an indication as to which of the information submitted under (iii), (iv), (vi), (vii) or subparagraph (b) has been reviewed by an assessor chosen by the manufacturer or importer and having appropriate experience; ...
... (xi) a request as to which of the information in Article 119(2) the manufacturer or importer considers should not be made available on the Internet in accordance with Article 77(2)(e), including a justification as to why publication could be harmful for his or any other concerned party's commercial interests. ...
ARTICLE-12: Information to be submitted depending on tonnage [go to this ARTICLE]
... (a) the information specified in Annex VII for non-phase-in substances, and for phase-in substances meeting one or both of the criteria specified in Annex III, manufactured or imported in quantities of 1 tonne or more per year per manufacturer or importer; ...
... (b) the information on physicochemical properties specified in Annex VII, section 7 for phase-in substances manufactured or imported in quantities of 1 tonne or more per year per manufacturer or importer which do not meet either of the criteria specified in Annex III; ...
... (c) the information specified in Annexes VII and VIII for substances manufactured or imported in quantities of 10 tonnes or more per year per manufacturer or importer; ...
... (d) the information specified in Annexes VII and VIII and testing proposals for the provision of the information specified in Annex IX for substances manufactured or imported in quantities of 100 tonnes or more per year per manufacturer or importer; ...
... (e) the information specified in Annexes VII and VIII and testing proposals for the provision of the information specified in Annexes IX and X for substances manufactured or imported in quantities of 1 000 tonnes or more per year per manufacturer or importer. ...
... 2. As soon as the quantity of a substance per manufacturer or importer that has already been registered reaches the next tonnage threshold, the manufacturer or importer shall inform the Agency immediately of the additional information he would require under paragraph 1. Article 26(3) and (4) shall apply adapted as necessary. ...
... 2. As soon as the quantity of a substance per manufacturer or importer that has already been registered reaches the next tonnage threshold, the manufacturer or importer shall inform the Agency immediately of the additional information he would require under paragraph 1. Article 26(3) and (4) shall apply adapted as necessary. ...
ARTICLE-15: Substances in plant protection and biocidal products [go to this ARTICLE]
... 1. Active substances and co-formulants manufactured or imported for use in plant protection products only and included either in Annex I to Directive 91/414/EEC(1)or in Regulation (EEC) No 3600/92(2), Regulation (EC) No 703/2001(3), Regulation (EC) No 1490/2002(4), Decision 2003/565/EC(5)and for any substance for which a Commission Decision on the completeness of the dossier has been taken pursuant to Article 6 Directive 91/414/EEC shall be regarded as being registered and the registration as completed for manufacture or import for the use as a plant protection product and therefore as fulfilling the requirements of Chapters 1 and 5 of this Title. ...
... 2. Active substances manufactured or imported for use in biocidal products only and included either in Annexes I, IA or IB to Directive 98/8/EC of the European Parliament and of the Council of 16 February 1998 concerning the placing of biocidal products on the market(6)or in Commission Regulation (EC) No 2032/2003 of 4 November 2003 on the second phase of the 10-year work programme referred to in Article 16(2) of Directive 98/8/EC(7), until the date of the decision referred to in the second subparagraph of Article 16(2) of Directive 98/8/EC, shall be regarded as being registered and the registration as completed for manufacture or import for the use in a biocidal product and therefore as fulfilling the requirements of Chapters 1 and 5 of this Title. ...
ARTICLE-18: Registration of transported isolated intermediates [go to this ARTICLE]
... 1. Any manufacturer or importer of a transported isolated intermediate in quantities of 1 tonne or more per year shall submit a registration to the Agency for the transported isolated intermediate. ...
... 3. A registration for a transported isolated intermediate in quantities of more than 1 000 tonnes per year per manufacturer or importer shall include the information specified in Annex VII in addition to the information required under paragraph 2. For the generation of this information, Article 13 shall apply. ...
... 4. Paragraphs 2 and 3 shall apply only to transported isolated intermediates if the manufacturer or importer confirms himself or states that he has received confirmation from the user that the synthesis of (an)other substance(s) from that intermediate takes place on other sites under the following strictly controlled conditions: ...
ARTICLE-19: Joint submission of data on isolated intermediates by multiple registrants [go to this ARTICLE]
... 1. When an on-site isolated intermediate or transported isolated intermediate is intended to be manufactured in the Community by one or more manufacturers and/or imported by one or more importers, the following shall apply. Subject to paragraph 2 of this Article, the information specified in Article 17(2)(c) and (d) and Article 18(2)(c) and (d) shall first be submitted by one manufacturer or importer acting with the agreement of the other assenting manufacturer(s) or importer(s) (hereinafter referred to as "the lead registrant"). Each registrant shall subsequently submit separately the information specified in Article 17(2)(a), (b), (e) and (f) and Article 18(2)(a),(b), (e) and (f). ...
... 1. When an on-site isolated intermediate or transported isolated intermediate is intended to be manufactured in the Community by one or more manufacturers and/or imported by one or more importers, the following shall apply. Subject to paragraph 2 of this Article, the information specified in Article 17(2)(c) and (d) and Article 18(2)(c) and (d) shall first be submitted by one manufacturer or importer acting with the agreement of the other assenting manufacturer(s) or importer(s) (hereinafter referred to as "the lead registrant"). Each registrant shall subsequently submit separately the information specified in Article 17(2)(a), (b), (e) and (f) and Article 18(2)(a),(b), (e) and (f). ...
... 2. A manufacturer or importer may submit the information referred to in Article 17(2)(c) or (d) and Article 18(2)(c) or (d) separately if: ...
... If points (a), (b) or (c) apply, the manufacturer or importer shall submit, along with the dossier, an explanation as to why the costs would be disproportionate, why disclosure of information was likely to lead to substantial commercial detriment, or the nature of the disagreement, as the case may be. ...
ARTICLE-20: Duties of the Agency [go to this ARTICLE]
... The relevant Member State shall be the Member State within which the manufacture takes place or the importer is established. If the manufacturer has production sites in more than one Member State, the relevant Member State shall be the one in which the head office of the manufacturer is established. The other Member States where the production sites are established shall also be notified. The Agency shall forthwith notify the competent authority of the relevant Member State(s) when any further information submitted by the registrant is available on the Agency database. ...
ARTICLE-21: Manufacturing and import of substances [go to this ARTICLE]
... 1. A registrant may start or continue the manufacture or import of a substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date, without prejudice to Article 27(8). In the case of registrations of phase-in substances, such a registrant may continue the manufacture or import of the substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date or, if submitted within the two-month period before the relevant deadline of Article 23, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three months from that deadline, without prejudice to Article 27(8). In the case of an update of a registration according to Article 22 a registrant may continue the manufacture or import of the substance, or the production or import of the article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the update date, without prejudice to Article 27(8). ...
... 1. A registrant may start or continue the manufacture or import of a substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date, without prejudice to Article 27(8). In the case of registrations of phase-in substances, such a registrant may continue the manufacture or import of the substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date or, if submitted within the two-month period before the relevant deadline of Article 23, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three months from that deadline, without prejudice to Article 27(8). In the case of an update of a registration according to Article 22 a registrant may continue the manufacture or import of the substance, or the production or import of the article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the update date, without prejudice to Article 27(8). ...
... 1. A registrant may start or continue the manufacture or import of a substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date, without prejudice to Article 27(8). In the case of registrations of phase-in substances, such a registrant may continue the manufacture or import of the substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date or, if submitted within the two-month period before the relevant deadline of Article 23, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three months from that deadline, without prejudice to Article 27(8). In the case of an update of a registration according to Article 22 a registrant may continue the manufacture or import of the substance, or the production or import of the article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the update date, without prejudice to Article 27(8). ...
... 1. A registrant may start or continue the manufacture or import of a substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date, without prejudice to Article 27(8). In the case of registrations of phase-in substances, such a registrant may continue the manufacture or import of the substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date or, if submitted within the two-month period before the relevant deadline of Article 23, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three months from that deadline, without prejudice to Article 27(8). In the case of an update of a registration according to Article 22 a registrant may continue the manufacture or import of the substance, or the production or import of the article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the update date, without prejudice to Article 27(8). ...
... 1. A registrant may start or continue the manufacture or import of a substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date, without prejudice to Article 27(8). In the case of registrations of phase-in substances, such a registrant may continue the manufacture or import of the substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date or, if submitted within the two-month period before the relevant deadline of Article 23, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three months from that deadline, without prejudice to Article 27(8). In the case of an update of a registration according to Article 22 a registrant may continue the manufacture or import of the substance, or the production or import of the article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the update date, without prejudice to Article 27(8). ...
... 1. A registrant may start or continue the manufacture or import of a substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date, without prejudice to Article 27(8). In the case of registrations of phase-in substances, such a registrant may continue the manufacture or import of the substance or production or import of an article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the submission date or, if submitted within the two-month period before the relevant deadline of Article 23, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three months from that deadline, without prejudice to Article 27(8). In the case of an update of a registration according to Article 22 a registrant may continue the manufacture or import of the substance, or the production or import of the article, if there is no indication to the contrary from the Agency in accordance with Article 20(2) within the three weeks after the update date, without prejudice to Article 27(8). ...
... 2. If the Agency has informed the registrant that he is to submit further information in accordance with the third subparagraph of Article 20(2), the registrant may start the manufacture or import of a substance or production or import of an article if there is no indication to the contrary from the Agency within the three weeks after receipt by the Agency of the further information necessary to complete his registration, without prejudice to Article 27(8). ...
... 2. If the Agency has informed the registrant that he is to submit further information in accordance with the third subparagraph of Article 20(2), the registrant may start the manufacture or import of a substance or production or import of an article if there is no indication to the contrary from the Agency within the three weeks after receipt by the Agency of the further information necessary to complete his registration, without prejudice to Article 27(8). ...
... 3. If a lead registrant submits parts of the registration on behalf of one or more other registrants, as provided for in Articles 11 or 19, any of the other registrants may manufacture or import the substance or produce or import the articles only after the expiry of the time-limit laid down in paragraph 1 or 2 of this Article and provided that there is no indication to the contrary from the Agency in respect of the registration of the lead registrant acting on behalf of the others and his own registration. ...
... 3. If a lead registrant submits parts of the registration on behalf of one or more other registrants, as provided for in Articles 11 or 19, any of the other registrants may manufacture or import the substance or produce or import the articles only after the expiry of the time-limit laid down in paragraph 1 or 2 of this Article and provided that there is no indication to the contrary from the Agency in respect of the registration of the lead registrant acting on behalf of the others and his own registration. ...
ARTICLE-22: Further duties of registrants [go to this ARTICLE]
... (a) any change in his status, such as being a manufacturer, an importer or a producer of articles, or in his identity, such as his name or address; ...
... (c) changes in the annual or total quantities manufactured or imported by him or in the quantities of substances present in articles produced or imported by him if these result in a change of tonnage band, including cessation of manufacture or import; ...
ARTICLE-23: Specific provisions for phase-in substances [go to this ARTICLE]
... (a) phase-in substances classified as carcinogenic, mutagenic or toxic to reproduction, category 1 or 2, in accordance with Directive 67/548/EEC and manufactured in the Community or imported, in quantities reaching 1 tonne or more per year per manufacturer or per importer, at least once after 1 June 2007; ...
... (b) phase-in substances classified as very toxic to aquatic organisms which may cause long-term adverse effects in the aquatic environment (R50/53) in accordance with Directive 67/548/EEC, and manufactured in the Community or imported in quantities reaching 100 tonnes or more per year per manufacturer or per importer, at least once after 1 June 2007; ...
... (c) phase-in substances manufactured in the Community or imported, in quantities reaching 1 000 tonnes or more per year per manufacturer or per importer, at least once after 1 June 2007. ...